北方工业大学机械工程研究生导师介绍:阎昱

本站小编 免费考研网/2016-07-26

北方工业大学机械工程研究生导师介绍:

阎昱,女,博士,副教授.
个人简历
2001年考入燕山大学学习,2005年获工学学士学位,2005年起北京航空航天大学博士;2010年至今北方工业大学副教授
教授课程
《材料成型原理》,本科生课程
《塑性成形工艺与模具设计》,本科生课程;《有限元分析技术》,研究生课程
主要研究领域和方向
1、金属塑性成形理论
2、成形工艺有限元仿真
3、成形缺陷控制
4、成形工艺优化
近年来主要科研项目
w 涉及应变速率与温升效应的先进高强度钢辊式冷弯成形断裂预测研究,国家自然科学基金项目(项目编号;51205004)(项目负责人)

国家自然科学基金面上项目“涉及不同加载路径和非均匀应变场亚稳定流动规律的具有加载路径和应变范围普适性的板料成形本构关系的建立”82万(主要参与人)

国家科技支撑计划“高强钢三维辊压成形技术开发”240万(主要参与人)

北京市精机工程项目“激光辅助超高强钢变截面辊弯成形装备样机研制” 300万(主要参与人)




近五年的荣誉和成果
YAN Yu, WAN Min, WANG Hai-Bo. Prediction of Fracture in Press Bend Forming of Aluminum Alloy High-stiffener Integral Panels. Computational Materials Science, 2011, 50(7):2232-2244.(SCI) w YAN Yu, LI Qiang, Wang Haibo, Simulation and experimental verification of flexible roll forming of steel sheets. Journal of Advanced Manufacturing Technology. (SCI)
YAN Yu, WANG Haibo , WAN Min. FEM modelling for press bend forming of doubly curved integrally stiffened aircraft panel Trans. Nonferrous Met. Soc. China 22(2012) s39?s47(SCIE)
YAN Yu, WANG Haibo, LI Qiang, and GUAN Yanzhi. Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification, CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2016, 29(2):342-350 (SCI)


YAN Yu, Haibo Wang, Qiang Li. The inverse parameter identification of Hill 48 yield criterion and its verification in press bending and roll forming process simulations Journal of Manufacturing Processes 20 (2015) 46–53 (SCI)

1 YAN Yu, LI Qiang, Wang Haibo, Simulation and experimental verification of flexible roll forming of steel sheets. Journal of Advanced Manufacturing Technology. (SCI)

wYAN Yu, WAN Min, WANG Hai-Bo, HUANG Lin. Optimization for the press bend forming path of aircraft integral panel. Transactions of Nonferrous Metals Society of China, 2010, 20(2): 294-301.(SCIE)
wYAN Yu, WAN Min, WANG Hai-Bo,Design and Optimization of Press Bend Forming Path for Producing Aircraft Integral Panels with Compound Curvatures. Chinese Journal of Aeronautics, 2010, 23(2): 274-282.(SCIE)
wYAN Yu, WAN Min, WANG Hai-Bo. FEM equivalent model for press bend forming of aircraft integral panel. Transactions of Nonferrous Metals Society of China, 2009, 19(2): 414-424. (SCIE)
wYAN Yu, WAN Min,WANG Hai-Bo,Prediction of the stiffener buckling in the press bend forming of the integral panel. Transactions of Nonferrous Metals Society of China, 2011, 21(11):2459-2465. (SCIE)
wYAN Yu, LI Qiang, FEM modeling and mechanics analysis of flexible roll forming. Applied Mechanics and Materials, 2011, 44-47:132-137. (EI)


科研项目、学术成果
近年来出版的主要教材与专著
在研主要项目
涉及应变速率与温升效应的先进高强度钢辊式冷弯成形断裂预测研究,国家自然科学基金项目(项目编号;51205004)
国内外学术活动


相关话题/成形 课程 工艺 塑性 本科生